CHKWK - 05993/05994 LIQUID POLISH
- MSDS: CHKWK
- Manufacturer: MINNESOTA MINING AND MFG CO AUTOMOTIVE TRADES DIV
- Product Name: 05993/05994 LIQUID POLISH
- National Stock Number: 7930-00D020045
Product Identification
Product ID:05993/05994 LIQUID POLISH
MSDS Date:08/26/1996
FSC:7930
NIIN:00D020045
MSDS Number: CHKWK
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-737-6501/800-364-3577
Info Phone: 612-733-1110
Cage: 52157
Contractor
Telephone: 612-737-4114
Cage: 52157
Ingredients
ALUMINUM SILICATE
CAS: 66402-68-4
Fraction By Weight: 10-20%
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 40-50%
MINERAL SPIRITS;NAPHTHOL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 20-30%
POLY (DIMETHYLSILOXANE)
CAS: 63148-62-9
RTECS: JJ6484500
Fraction By Weight: 3-7%
OLEIC ACID
CAS: 112-80-1
RTECS: RG2275000
Fraction By Weight: 1-5%
POLYMETHYLSILOXANE
CAS: 68440-84-6
Fraction By Weight: 1-5%
MORPHOLINE
CAS: 110-91-8
RTECS: QD6475000
Fraction By Weight: 0.5-1.5%
OSHA PEL S, 20 PPM
ACGIH TLV: S, 20 PPM; 9596
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:MODERATE IRRITATION.SKIN:MILD SKIN
IRRITATION.INHAL:CENTRAL NERVOUS SYSTEM DEPRESSION.IRRIT(UPPER
RESPIRATORY).INGEST:IRIT GASTROINTESTINAL TISSUE.ASPIRATION
PNEUMONITIS.
Effects of Overexposure:EYE:RED,SWELLING,PAIN,TEAR,HAZY
VISION.SKIN:RED,SWELLING,ITCH.IHAL:HEAD,DIZZ,DROWS,INCOORDINATION,S
LOWED RX TIME,SLURRED SPEECH,GIDDINESS,UNCONSC.SORENESS OF
NOSE/THROAT,COUGHING,SNEEZING.INGEST:PAIN, VOMIT,ABD
TENDERNESS,NAU,BLOOD IN VOMITUS,BLOOD IN FECES.COUGH,DIFF
BREATH,WHEEZING,COUGH UP BLOOD,PNEUMONIA-FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:IMMED FLUSH W/LG AMTS OF WATER.GET IMMED MED
ATTN.SKIN:FLUSH W/LG AMTS OF WATER.IRRIT PERSISTS GET MED
ATTN.INHAL:REMOVE TO FRESH AIR.NOT BREATH GIVE ART RESP;BREATH
DIFFI GET IMEMD MED ATTN.INGES T:CALL DR IMMED.ONLY INDUCE VOMIT AT
INSTRUCTION OF PHYSICIAN.NEVER GIVE ANYTHING BY MOUTH TO UNCONSC
PERSON.
Fire Fighting
Flash Point Method:PMCC
Flash Point:186F,86C
Autoignition Temp:Autoignition Temp Text:ND
Lower Limits:1.1
Upper Limits:6.0
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROT CLOTH INCLUDE
HELMET,SELF-CONTAIN POSITIVE PRESS/PRESS DEMAN BREATH
APPARATUS,BUNKER COAT, PANTS, BANDS AROUND ARMS/WAIST/LEGS, FCMASK,
PROT COVERING FOR EXPOSED AREAS OF HEAD.
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:REFER TO MSDS SEC ON PHYS/HEALTH HAZ,RESP
PROT.VENTI/PPE.SPILL ASSIST IN USA 612-733-1110/612-733-6100.COVER
W/INORG ABSORB MATL.COLLECT SPILL MATL.CLEANUP RESIDUE
W/WATER.PLACE IN US DOT APPROV CNTNR .
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DONT INGEST.KEEP CONTAINER CLOSED WHEN
NOT IN USE.KEEP OUT OF REACH OF CHILDREN.KEEP CNTNR TIGHTLY CLOSED.
Other Precautions:KEEP AWAY FROM HEAT/SPARKS/OPEN FLAME,OTHER SOURCES
OF IGNITION.COMBUSTIBLE LIQUID/VAPOR.
Exposure Controls
Respiratory Protection:AVOID BREATHING OF VAPORS.
Ventilation:USE IN WELL-VENTI AREA.PROVIDE SUFFICIENT VENTI TO MAINTAIN
EMISSIONS BELOW RECOMMENDED EXPO LIMITS.
Protective Gloves:NITRILE RUBBER, POLYVINYL ALCOHOL, FLUOROELASTOMER
(VITON).
Eye Protection:AVOID EYE CONTACT
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
Chemical Properties
HCC:V4
Boiling Pt:=100.C, 212.F
Melt/Freeze Pt:M.P/F.P Text:ND
Decomp Temp:Decomp Text:NP
Vapor Pres:ND
Vapor Density:>1.00
Spec Gravity:1.010-1.020
pH:8.9-9.1
VOC Grams/Liter:2.53
Viscosity:2000-4000CPS
Evaporation Rate & Reference:0.30, BUTYL ACETATE=1
Solubility in Water:DILUTABLE
Appearance and Odor:LIQUID, WHITE VISCOUS EMULSION WITH LITTLE ODOR
Percent Volatiles by Volume:70-75
Corrosion Rate:NP
Stability
Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, TOXIC
VAPORS, GASES OF PARTICULATES.
Disposal
Waste Disposal Methods:INCINERATE IN PERMITTED HAZ WASTE INCINERATOR IN
PRESENCE OF COMBUSTIBLE MATL.DISPO OF COMPLETELY ABSORBED WASTE
PROD IN FACILITY PERMITTED TO ACCEPT CHEM WASTES.CONTAINS CHEM
REPORTING REQMTS OF SEC 313 SARA/40CFR372:ALUMINUM SILICATE.SINCE
REGS VARY CONSULT APPLICABLE REGS/AUTHORITIES BEFORE DISPO SAL. EPA
HAZ WASTE#: NONE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.